Use this durable, removable film to create commercial vehicle or fleet graphics, bus graphics, emblems, striping, transit advertising, point-of-purchase or trade show displays, general signage, vending machine or refrigerator case graphics. Film 160-30 has been approved for use with the Scitex® Pressjet-W Digital Press.

Film 160-30 is especially well suited for large graphics because it features 3M’s patented pressure-activated adhesive, making it easier to reposition graphics until firm pressure is applied during installation.

When used with compatible products, produced by one of 3M’s Scotchprint® Graphics Authorized Manufacturers and applied according to written instructions, this film can be used to produce a Scotchprint® Graphic.

• 3M^TM Controltac^TM Plus Film 160-30 is opaque white with a matte finish and features a tinted adhesive for increased hiding power.
• It is removable up to five years with heat only; no accessories or chemicals are needed.
• Film160-30 is treated to provide better adhesion to enamel paints.

Film 160-30:

• is a 4 mil (0.10 mm) white opaque vinyl film with a matte finish; 4.5 to 5 mil (0.11 to 0.13 mm) with the adhesive
• features a gray, pressure-activated adhesive for increased hiding power
• has a 94# polyethylene-coated, paper liner

This film can be used on flat surfaces, with and without rivets. Appropriate substrates include glass, metal, paint and rigid plastic. It has an application temperature range from 40º to 100ºF (4º to 38ºC).

Image graphics onto this film using:

• the Scitex® Pressjet-W Digital Press
• 3M^TM Piezo Ink Jet Series 1600 for the Scitex® Pressjet-W Digital Press
• Selected 3M overlaminates and overprint clears*

*Most Piezo Ink Jet graphics do not require overlaminates or overprint clears to be covered by the 3M^TM MCS^TM Warranty.

This product is covered by the 3M^TM MCS^TM Warranty – the most comprehensive warranty in the industry.

Available in sheets and rolls, film 160-30 comes in standard 24", 36" or 48" widths.

Unprocessed film has a shelf life of two years; processed film has a shelf life of one year. It should be stored in a clean, dry area, out of direct sunlight and at a temperature less than 100ºF (38ºC).

For more specific product information, please refer to Product Bulletin 160.